Zynamo Inc

PNJ Logo

Patriot Frac Plug

The Patriot frac plug provides a means to isolate multiple zones during high pressure stimulation frac operations. The Patriot is a ball drop(flow thru) Frac Plug that allows from fluid to flow to above and below the isolation point until the ball is pumped down from the surface and seated on top of the composite frac plug. The operator can pressure up against the frac plug to achieve isolation. Due to the composition of the material, the plugs can be easily milled and circulated back to the surface.

  • FEATURES
  • OPTIONS
  • The PATRIOT drills out safely and quickly with conventional tri-cone or junk mill bits, including coiled-tubing milling.
  • The PATRIOT’s composite slip is made from high performance, proprietary, composite material assembled with buttons for anchoring in casing that will circulate easily during milling.
  • 89% metal reduction in upper slip compared to the ISO-Drill.
  • Overall metal reduction: 52% less metal than previous ISO-Drill generation tools.
  • Light weight particles minimize plugging up surface equipment.
  • Notched muleshoe provides a clutch , preventing spinning during mill out.
  • Available in a Ball Drop or an Internal (caged)Ball.
  • Drop ball available in multiple specific gravities.
  • The PATRIOT is a full composite, one-piece body with composite components that provide fast drill-out times and reliability during the setting process.
  • The PATRIOT can be set on wireline using the conventional setting tools, and All tools are capable of setting with a Baker 10 if necessary.
  • Custom ODs are also available to suit heavy weight casing* and Specialty jobs*
  • Pumpdown rings available upon request.
  • The maximum pump rate is 15 bbl/min.
  • The run-in speed for wireline application is recommended at 450ft/min in the vertical, and 400 ft/min. maximum.
  • Once the plug is set, slowly fill the hole with fluid to prevent a hammer effect on the plug.
  • Upon entering the curve of the well, slowly begin pumping 3 bbl/min and increase to approximately 6 bbl/min at a 45° inclination. Up to 12 bbl/min may be pumped while approaching 90° from horizontal.